If you go on Google search, and type In - " Orgone Blasters " you will find Lots of Information on them. They are also called - " Holy Grenades"

You need to wear a mask over your face & Goggles, as the auto resin, is very toxic, before it's hardened. They have to be made outside, where There Is good ventilation. You should wear gloves also. Do not mix the auto resin, till the very last Moment, after you have all ingredients In place In the muffin pan, as it dries very quickly, and you Don't want to waste it. You can buy most everything you need at Walmart or Canadian Tire, or Anywhere they sell automobile resin, including auto resin, mask, goggles, 100 % copper scrubbies. You can get the crystals at any Metaphysical book store or lapidary store. You can bye a muffin pan at Value village or a 2nd Hand store . No sense using a new one. The crystals need to have a point on one end. They take About an hour to dry.

Here are the directions on how to make the Orgone blasters ! The recipe calls for shaved aluminum, You can use aluminum foil, cut up very small, or even better, you can use pop cans, they are made Of aluminum. They are quite easy to cut up, must be very small. Or you can get some shaved Aluminum from an auto shop, that does repairs on cars. You also need small pieces of copper. You Can use those copper scrubbies, that you clean pots & pans with. just cut them up small. They must Be 100 % copper.

You will also need copper wire { 18 gauge } { real copper } you will need 7 - 8 Inches for each Orgone blaster that you make. You will also need a quartz crystal, at least one inch long with a point on one end. You will wrap the copper wire around the crystal. You will need one Copper penny for each blaster, you're making. The pennies must be from the year 1983 or lower. Do Not use any pennies that were made after 1983 ! Also a muffin pan or other mold. You must layer These ingredients on top of each other. { do not mix resin & hardener till all the muffin cups have been filled } USE ONLY LIQUID RESIN } [ NOT JELLIED RESIN ]!

First grease each muffin tin, with Cooking oil, then add ingredients, as instructed in this email. put a little copper shavings in bottom of Pan, add your pennies on top, add shaved aluminum, a little more copper shavings, then wrap copper Wire around crystal & place in tin. Add a little more copper shavings. When everything is in place, Mix resin & hardener & pour a little in each pan; let it absorb, then pour the rest in to fill up each one up. Takes about an hr. to harden.

Place one on each 4 corners of your property, If they can be Seen from the road, just place them as close to your home in all 4 corners of your property, as you Can. Put one at your front door, & back door, under stairs or porch. One at your computer, TV, one in your bed. Put one in your car, and I carry one either in my purse, pocket, or put one in a small crystal pouch & hang it around my neck. Wearing one on you all the time will protect you wherever you go !